Overview

Our range of single-phase and 3 phase meter boxes are constructed from glass reinforced polymer (GRP) which ensures durability which ensures a strong, non-corrosion and weather-resistant meter box.

Wall-mounted / surface or recessed 

A wall-mounted / surface external electric box is easy to install on the property wall or boundary wall. A wall-mounted external electric box is secured in position onto the wall. This is suitable for all external electric meter boxes. See below the surface-mounted external electric boxes available:

• • UK Standard Surface Mounted Electric Meter Box - (596 x 410 x 220mm)
  • Mark 2 Surface Mounted Electric Meter Box - (503 x 408 x 236mm)
  • Large 3 Phase Surface Mounted Electric Meter Box - (794 x 565 x 190mm)

 

A recessed external electric boxes are an ideal solution when space is limited. Recessed or built in external electric boxes are located within a wall cavity and appear smaller. See below the recessed external electric boxes available:

• • UK Standard Recessed Electric Meter Box (595 x 409 x 210mm)
  • Small Permali Recessed Electric Meter Box (615 x 425 x 185mm)
  • Medium Permali Recessed Electric Meter Box (690 x 490 x 195mm)
  • Large 3 Phase Recessed / Large Permali Recessed Electric Meter Box (794 x 565 x 180mm)

 

Used externally

All meter boxes are constructed from Glass Reinforced Polymer(GRP) which ensures all meter boxes are weather resistant and water tight inside. This construction also allows for non - corrosion or rust when used externally.

 

Help : how to videos from MeterBoxesDirect

See below a list of videos available to help with replacing or fixing meter boxes. 

How to fit and measure a meter box door

This video provides a brief guide on how to measure a meter door (electricity or gas), is to open the door and measure from the inside. Using a measuring tape, follow these simple steps: 

1. Measure the height (top to bottom) of the door.
2. Measure the width of the door (left to right).
3. Measure the width of hinges
4. Measure the distance of hinges from the top and from the bottom.
5. Look at the type of hinges on the door (if available) and make a note if they are located on the right or left-hand side (while looking at the door from the outside).

 

How to fit a GRP Architrave Overbox (EB0025)

This video provides a brief guide on how to fit your Tricel's GRP Architrave Overbox (EBP0025) onto your existing meter box. This overbox is manufactured from flame retardant SMC material and comes with a tapered back. It is suitable for Tricel, Medium Permali and Wavin meter boxes.

 

How to fit a replacement meter box door

This video is a brief guide on how to fit a replacement meter box door to an existing meter box. The box shown in the video is a recessed UK electrical meter box.

1. The first step is to remove the existing damaged meter box door by depressing the brass spring pin.
2. Secondly, fit the new Tricel door by holding it upright and placing the steel pin into the pre drilled hole at the bottom of the meter box.
3. Position the brass spring pin under the pre-drilled hole at the top of the box, releasing the spring pin allowing it to slot into place.
4. Finally, close the door as normal. This door features a slam shut lock (SSL) but is also available as a turn key lock (TKL)

 

How to fit a replacement meter box latch/lock (EK0006)

This video is a brief guide on how to fit a replacement meter box latch/lock to a meter box door. 

 

How to replace meterbox hinges

This video is a brief guide on how to replace meterbox hinges

How to replace a nylon meter box lock (EK0001)

This video is a brief guide on how to replace a nylon meter box lock simply and quickly. If you have further questions, don’t hesitate to contact us.