Mark 2 UK Standard Gas Meter Box - Recessed fit.
Dimensions
- Height: 595mm
- Width: 409mm
- Depth: 214mm
Colour
Specifications
- Compliant to British Standard BS 8499: 2009
- Fire retardant BS476, Part 7, 1997, Class 2
- Constructed from GRP – Glass Reinforced Plastic
- Suitable for all meters including prepay and smart
- Will not corrode, weather resistant
- Easily cleaned and can be painted
- Complete with spigot, hinges, lock and key
- Hinges on right
Fitting instructions
- Build the box into the wall in the position specified, ensuring it does not bridge the damp – proof course.
- The base and sides of the box shall be fully bedded into the mortar to hold it into the wall with the sides of the architrave touching the outer leaf of the brickwork.
- A 0.1mm thick polythene sheet or similar, at least 700mm wide shall be fitted as a damp-proof course above and behind the box as shown. Alternatively, a suitable cavity tray may be used.
- Where a spigot is fitted, build the inner wall around it, filling any space between the spigot and the wall with mortar. (The spigot will be cut flush with the inner finish of the wall by the pipework installer.) (Full installation guidelines are supplied with the Meter Box.)
Product download
