How To Assemble A Pedestal For Kiosk
Suitable for several of our IP43 and IP55 kiosks, our pedestals for kiosk come flat-packed. That’s why we will explain to you in this article how to assemble a pedestal for kiosk by yourself and how to mount a kiosk on it. You can also view our tutorial video.
How to assemble a pedestal for kiosk: instructions
-
Assemble the sides with the bottom back panel using M6x10 screws.
-
Assemble the sides with the bottom front panel using M6x10 screws.
-
Assemble the back top panel to the sides using M6x10 screws.
-
Assemble the top cover to the sidewalls using M8x35 screws.
-
Insert the front top panel and lock in place with key provided.
-
Finally, assemble the base plate to the pedestal using M6x25 screws.
How to assemble a kiosk to the pedestal: instructions
-
Place the kiosk on top of the pedestal.
-
Open the kiosk door and place M10x90 bolts provided into the pre-drilled holes in each corner of the kiosk and pedestal.
-
Open the front panel of the pedestal and using nuts and washers, tighten each of the four bolts in place.
-
Insert the front panel back in place and lock.
-
Close kiosk door and lock.
If you are still not sure about how to assemble a pedestal for kiosk, please contact us directly, we will be happy to assist.