MeterBoxesDirect

Shopping Cart 0
£0.00

Call Us Now

01453 791616

How to fix a meter box?

 

Meter box can be fixed depending on the scale and type of damage. In some cases where the meterbox is substantially damaged a proper replacement may be required. Some types of damages and fixing solutions discussed below. These fixing should be carried out by a competent individual.

1) Damaged Door or door hinge

Solution: we supply the door as a Spare part.

2) Door lock damages

Solution:  we supply the replacement Door and Locks to fix this issue.

3) Meterbox architrave damages

Solution: we supply overbox solution for better repairs. An Overbox can fix it or replacement of meterbox to be done.

 

Meter box repair products & spare parts

Meterboxesdirect offers you a wide range of overboxes, spare parts and repair products for your meter box.

Also, our company, design and manufacture a range of replacement doors for most of the meter boxes available on our website.

For more details on our repair products & spare parts, you can consult our category page.

 

How to fix a meter box door?

 

First of all, the first step is to remove the actual broken meter box door by depressing the brass spring pin.

The second step is to fit the new purchased door by holding it upright and placing the steel pin into the pre-drilled hole at the bottom of the meter box.

Next, you need to position the brass spring pin under the pre-drilled hole at the top of the box, releasing the spring pin allowing it to slot into place.

The last step is to close the door as usual. This door has a slam shut lock (SSL) but is also possible to purchase a turn key lock door (TKL).

For more information, you can consult the video below.

Details about our meter boxes

Meterboxesdirect (MBD) manufactures a variety of wall mounted and recessed meter boxes.

All of our products are conform to the British Standard BS 8499: 2009.

All our boxes are fabricated from Glass Reinforced Plastic (GRP) which is known for its strength and durability.

We also offer a range of products manufactured using our very own raw materials and own manufacturing process (Sheet Moulding Compound and GRP moulding process).

Meterboxesdirect has been for over 4 decades, active in the fabrication of meter boxes.

Our company based in Gloucester, supply many of the industry leaders, such as British Gas and the National Grid.

All our meter boxes are designed for industry and individual needs. Our experience in the industry and in the meter box market is a sign of the quality and durability of our range of product.

 

If you need further information about our products, you can contact our support team.