Mark 1 Surface Mounted Gas Box Door and Frame (Overbox) - UK Standard

British Standard compliant gas door and frame Repair Solution. Suitable for the UK Standard Mark 1 Surface Mounted meter box. Supplied with hinges, lock and key.

Made of GRP. Suitable to work with all smart meters.

Dimensions

• Height: 510mm
• Width: 450mm
• Depth: 310mm

Colour

• White

Specifications

• Compliant to BS 8499 : 2017
• Constructed from GRP – Glass Reinforced Polymer
• Will not corrode, weather resistant
• Easily cleaned and can be painted
• Hinges on right

Fitting instructions

• Step 1: Remove the damaged FRONT from the Gas box on the wall of the house (do retain existing fixing bolts). Check the back of the box for any damage before fitting replacement. If you are concerned in any way contact your local Gas supplier. ** Do not attempt to interfere with the Gas Meter in anyway.
• Step 2: Place the Mark 1 Gas Overbox over the back of the gas box. The galvanized metal bracket at the back should sit into place holding the top of the Mark 1 Gas Overbox to the Gas back board.
• Step 3: Using existing bolts, screw them into the pre existing holes on the gas back board. Hand tighten them until snug. ** Do not overtighten as you may damage the replacement Mark 1 Gas Overbox.
• Step 4: Open and close the door to ensure that everything is perfect. Relock the door; you’re done.

Downloads

• Mark 1 Surface Mounted Gas Box Door and Frame (Overbox) - UK Standard Specification Sheet
• Repair Gas Meter Box